设备简介Equipment Introduction

  LMW型双锥混合机由双锥筒、机械密封、机架、减速传动、搅拌叶片等构成。该机的工作过程是：把需混合的几种物料通过真空输送或人工加料投放到双锥体内，上好筒盖，开起设备，双锥筒及搅拌叶片同时转动，旋转的双锥筒使筒体内物料产生紊乱翻滚混合，该机在LMW系列双锥混合机的基础上增加了搅拌装置,高速旋转的搅拌叶片打碎结团物料，使物料在筒体内快速混合。LMW型双锥混料机工作过程无死角，无沉积，可使混合的物料快速达到均匀一致的效果

  The LMW double cone mixer is composed of a double cone cylinder, mechanical seal, frame, reduction drive, mixing blades, etc. The working process of this machine is to transfer several materials that need to be mixed into the double cone through vacuum or manual feeding, put on the cylinder cover, open the equipment, and rotate the double cone cylinder and mixing blades simultaneously. The rotating double cone cylinder causes the materials in the cylinder to mix in a turbulent and tumbling manner. On the basis of the LMW series double cone mixer, this machine has added a mixing device, and the high-speed rotating mixing blades break the agglomerated materials, allowing the materials to mix quickly inside the cylinder. The LMW double cone mixer has no dead corners or sedimentation during operation, which can quickly achieve a uniform and consistent effect of mixed materials

工作原理operational principle

    LMW型双锥混合机机是新型、高效、精细容器回转、搅拌型混合设备，用于各种粉状、粒状物料的均匀混合，具有很高的混合度，对添加量很少的配料同样能达到较好的混合度；另外对容易凝块的物料、含有少量水份的物料均能快速的混合，混合速度快，混合效果好，混合均匀度在95%以上该机采用机械密封，粉料不会泄漏，轴承使用寿命长；该机混合效率高、工作效率较高、劳动强度低、操作方便。可在磁粉、陶瓷、化工、制药、饲料等行业使用。

  The LMW type double cone mixer is a new, efficient, fine container rotary and stirring type mixing equipment, used for the uniform mixing of various powdered and granular materials, with high mixing degree. It can also achieve good mixing degree for ingredients with very little addition amount; In addition, it can quickly mix materials that are prone to clumping and contain a small amount of water. The mixing speed is fast, the mixing effect is good, and the mixing uniformity is above 95%. The machine adopts a mechanical seal, so the powder will not leak, and the bearing service life is long; This machine has high mixing efficiency, high work efficiency, low labor intensity, and convenient operation. Can be used in industries such as magnetic powder, ceramics, chemicals, pharmaceuticals, and feed.

应用范围Application scope

• 金属粉末:铝．铅、锌、铜、铁、镍、合金、磁性材料等金属为粉末。

• 树脂、塑料、橡胶助剂、染料、农药填充料等化工化学材料。

• 符合卫生指标设计的食品类：面粉、可可、咖啡、调味品、添加剂等等。

• 按GMPS要求设计的中西原料药，西药，中成药。

• 粮食类的谷物、玉米、豆类、芝麻等作物精选、去壳、去杂。

• 磨料：玻璃粉珠、氧化铝、刚玉、氯炭、金刚砂、石英砂等其他研磨材料。

• 饲料加工粉末、颗粒、添加剂等。

• 肥料的原料筛分和其他成品精筛。

• 矿产中的各种矿原粉及其加工后的成品筛分。

• 纤维性物料：木屑、木粉、木炭、活性炭、炭黑及其它纤维物料。

• 电焊料、耐火材料、荧光粉等各种物料及资源的回收利用。

•  Metal powder: Aluminum, lead, zinc, copper, iron, nickel, alloys, magnetic materials and other metals are powders.

• Chemical materials such as resins, plastics, rubber additives, dyes, pesticide fillers, etc.

• Food categories that meet hygiene standards: flour, cocoa, coffee, seasonings, additives, etc.

• Chinese and western APIs, western medicines and traditional Chinese patent medicines and simple preparations designed according to the requirements of GMPS.

• Selecting, hulling, and removing impurities from grains, corn, beans, sesame, and other crops related to grain.

• Abrasives: Other grinding materials such as glass beads, alumina, corundum, chlorinated carbon, diamond sand, quartz sand, etc.

• Feed processing powders, granules, additives, etc.

• Raw material screening of fertilizers and fine screening of other finished products.

• Screening of various mineral raw materials and their processed products in minerals.

• Fibrous materials: wood chips, wood powder, charcoal, activated carbon, carbon black, and other fibrous materials.

• Recycling and utilization of various materials and resources such as welding materials, refractory materials, fluorescent powders, etc.

设备特点Equipment characteristics

• 由一台电动机拖动，筒体由链轮带动，搅拌叶片由三角带带动，结构简单，维修方便；

• 双锥筒进料口采用快开旋开阀，出料口采用大口径90°旋阀，使用特别方便。

• 双锥筒支撑轴承采用了机械密封的隔尘处理，具有可靠的密封效果，粉料不会泄漏，不会因物料进到轴承内，导致轴承快速磨损而破坏；

• Dragged by an electric motor, the cylinder is driven by a sprocket, and the mixing blades are driven by a triangular belt, with a simple structure and convenient maintenance;

• The feeding port of the double cone cylinder adopts a quick opening rotary valve, and the discharging port adopts a large diameter 90 ° rotary valve, which is particularly convenient to use.

• The double cone support bearing adopts mechanical sealing for dust isolation treatment, which has a reliable sealing effect. The powder material will not leak and will not be damaged due to rapid wear of the bearing caused by material entering the bearing;

可增加配置Can add configurations

• 根据客户要求定制喷液或添加剂装置；

• 可根据用户需要改作成真空干燥机。

• Customize spray or additive devices according to customer requirements;

• It can be changed to a vacuum dryer according to user needs.

技术参数表Technical parameter table

注：设备产量仅供参考，具体产量以实际测试为准，

Note: The equipment output is for reference only, and the specific output is subject to actual testing