设备简介Equipment Introduction

  强力破碎机主要适用于聚苯乙烯，聚丙烯、尼龙、工程塑料以及聚氯泡沫软料的废次制品、PPR管、缠绕管或注射喷头等强力破碎之用。强力破碎机可更换相应的筛孔板，并调整刀片间隙，还可强力破碎各种吹塑膜、压延膜、薄片、薄板等塑料废品

The powerful crusher is mainly used for crushing waste and inferior products, PPR pipes, winding pipes or injection nozzles of polystyrene, polypropylene, nylon, engineering plastics and polychlorinated foam soft materials. The powerful crusher can replace the corresponding sieve plate and adjust the blade gap, and can also forcefully crush various plastic waste products such as blow molded films, calendered films, thin sheets, and thin sheets

工作原理operational principle

破碎机为卧式粉碎结构，物料由进料斗进入粉碎室，利用旋转刀与固定刀冲击、剪切而获得粉碎，经旋转离心力的作用，物料自动流向出口处。该机按“GMP”标准设计，整机采用不锈钢材料制造，结构简单，清洗方便、噪音低、目前是粗粉碎中最理想的设备.

The crusher is a horizontal crushing structure, where the material enters the crushing chamber from the feeding hopper and is crushed by the impact and shear of the rotating and fixed knives. Under the action of the rotating centrifugal force, the material automatically flows towards the outlet. This machine is designed according to the GMP standard, and the whole machine is made of stainless steel material. It has a simple structure, convenient cleaning, low noise, and is currently the most ideal equipment in rough crushing

设备特点Equipment characteristics

• 强力破碎机全钢焊接机座，坚固耐用；

• 易拆式设计，清洗维修方便；

• 强力破碎机刀刃锋利，更换方便， 持久耐用；
  

• 粉碎各类软、硬塑胶，轻松容易；

• 强力破碎机装有先进科学的保护系统，确保安全使用。

• Strong crusher all steel welded base, sturdy and durable;

• Easy to disassemble design, convenient for cleaning and maintenance;

• The blade of the powerful crusher is sharp, easy to replace, and durable;

• Crush various types of soft and hard plastics easily and easily;

• The powerful crusher is equipped with an advanced and scientific protection system to ensure safe use.

技术参数表Technical parameter table

注：设备产量仅供参考，具体产量以实际测试为准，

Note: The equipment output is for reference only, and the specific output is subject to actual testing