设备简介Equipment Introduction

  立式盘式搅拌机的搅拌盘体全部安装固定在机架上，机架均匀采用优碳钢板，加厚槽钢焊接而成。采用新颖的转子结构，使转子与盘体和盘底的最小间隙可调只能接近零，有效地减少了物料的残留量，盘内采用聚丙烯板内或不锈钢板，因此不易粘料、耐磨损、采用摆线针轮减速具有结构紧凑，操作方便、搅拌给料均匀、卸料运输方便等特点。总体结构更加合理，外型美观，操作维修方便。该机主要配套用于有机肥、复合肥、复混肥生产线使用。

  The mixing discs of the vertical disc mixer are all installed and fixed on the frame, which is uniformly made of high-quality carbon steel plates and welded with thickened channel steel. Adopting a novel rotor structure, the minimum gap between the rotor and the disc body and bottom can only be adjusted to be close to zero, effectively reducing the residual amount of materials. The disc is made of polypropylene or stainless steel plates, which are not easy to stick, wear-resistant, and the use of cycloidal pinwheel reduction has the characteristics of compact structure, easy operation, uniform mixing and feeding, and convenient unloading and transportation. The overall structure is more reasonable, with a beautiful appearance and convenient operation and maintenance. This machine is mainly used in organic fertilizer, compound fertilizer, and compound fertilizer production lines.

工作原理operational principle

  盘式搅拌机电动机带动减速机运转，减速机带动主轴，主轴带动搅拌齿搅拌物料。

  The electric motor of the disc mixer drives the reducer to operate, and the reducer drives the main shaft. The main shaft drives the mixing teeth to mix materials.

应用范围Application scope

  主要用于肥料、饲料生产过程的原料混合。亦可用于各种生产场合的原料混合，像搅拌化肥，饲料，粉末，五谷杂粮等。化工、制药、建材涂料等行业的原料混合。

  Mainly used for mixing raw materials in the production process of fertilizers and feed. It can also be used for mixing raw materials in various production scenarios, such as stirring fertilizers, feed, powders, grains, and other grains. Mixing of raw materials in industries such as chemical, pharmaceutical, building materials and coatings.

设备特点Equipment characteristics

• 具有搅拌效率高,占地面积少。螺旋叶片采用高耐磨特种合金。

• 盘式搅拌机采用减速器传动，转动平稳，噪音低。

• 盘式搅拌机从顶部进料、底部排料,结构合理。

• 各结合面之间的密封严密,运行平稳。

• 效率高，采用高耐磨合金。具有搅拌效率高,占地面积少。螺旋叶片采用高耐磨特种合金。

• 噪音低。盘式搅拌机采用减速器传动，转动平稳，噪音低。

• 结构合理。盘式搅拌机从顶部进料、底部排料,结构合理。

• 运行平稳。各结合面之间的密封严密,运行平稳。

• It has high mixing efficiency and a small footprint. The spiral blades are made of high wear-resistant special alloys.

• The disc mixer adopts a reducer transmission, which rotates smoothly and has low noise.

• The disc mixer is fed from the top and discharged from the bottom, with a reasonable structure.

• The sealing between each joint surface is tight and runs smoothly.

• High efficiency, using high wear-resistant alloys. It has high mixing efficiency and a small footprint. The spiral blades are made of high wear-resistant special alloys.

• Low noise. The disc mixer adopts a reducer transmission, which rotates smoothly and has low noise.

• Reasonable structure. The disc mixer is fed from the top and discharged from the bottom, with a reasonable structure.

• Smooth operation. The sealing between each joint surface is tight and runs smoothly.

技术参数表Technical parameter table

注：设备产量仅供参考，具体产量以实际测试为准，

Note: The equipment output is for reference only, and the specific output is subject to actual testing